Frame straightening in Covina, CA

DG Collision Center measures and straightens bent frames and unibody structure at our shop on East San Bernardino Road in Covina. We read the manufacturer’s control points with Car-O-Liner equipment, pull the structure back in measured stages and re-measure before the car goes back on the road. Photo estimates are free.

  • Car-O-Liner measuring
  • Unibody & frame
  • I-CAR certified
  • Insurance documented

Get a free estimate

Tell us about the damage and we will get back to you.

* Required. We’ll only use your details to respond to your request.

Location

781 E. San Bernardino Rd, Covina, CA 91723

Equipment

Car-O-Liner measuring

Process

Measure, pull, re-measure

Reports

Printed before and after

Experience

Over 30 years

What structural repair covers

Structural repair that puts your car back on the marks

Frame straightening is measured work, not guesswork with a chain. We compare every control point with the factory sheet, pull in stages, check the numbers again after each pull and align the suspension so the wheels sit square.

Electronic chassis measuring

Control points are read with Car-O-Liner equipment and compared with factory dimensions before a single pull is made.

Unibody straightening

The structure is anchored and pulled back in measured stages, so the panels and the paint are not overstressed along the way.

Structural welding and sectioning

Rails, aprons and pillars are sectioned at the approved joints and welded to OEM procedure with corrosion protection restored.

Suspension geometry

Strut towers, subframes and pickup points are checked so the wheels sit square.

Re-measure and report

The finished repair is measured again and the printout goes in your file.

Road test

The car is aligned, road tested and handed back.

How frame repair works

Measured, pulled and proven

Nothing is pulled until we know the baseline, and nothing is finished until the numbers line up.

01

Photo estimate

Send photos of the impact and both wheel positions and we book a measuring slot for you.

02

Baseline measurement

We mount the car, read every control point and compare the numbers with the factory sheet for your model.

03

Pull plan and anchors

Each pull is planned in stages, the car is anchored at the correct points and the structure is eased back toward the factory numbers.

04

Straighten and weld

Damaged sections are replaced and welded to OEM procedure while the rest is pulled back into shape.

05

Re-measure and align

The car is measured again, aligned and road tested, then the printout goes in your file before handover.

Why choose us

Why structural repair belongs in a certified shop

Frame damage hides. A car can look straight and still pull to one side, wear a tyre edge or protect you badly in the next hit, so we measure the structure before anything is pulled or replaced.

Car-O-Liner measuring against OEM control points

I-CAR certified structural technicians

Staged pulls that look after panels and paint

Printed measurement reports for your insurer

Alignment and road test before every handover

We work directly with all insurance companies

Black Ram 1500 pickup with hood and front-end damage before repair at DG Collision Center in Covina, CA

Before

Black Ram 1500 pickup fully repaired and refinished after collision repair at DG Collision Center in Covina, CA

After

“A structural repair is finished when the measured numbers line up, not when the car looks straight in the car park, and we keep the printouts to prove it.”

Dan Hansen, owner, DG Collision Center

Gallery

Structural repair, before and after

Silver Mazda3 sedan with heavy front-end collision damage before repair at DG Collision Center in Covina, CA

Before

Silver Mazda3 sedan fully repaired and refinished after collision repair at DG Collision Center in Covina, CA

After

Silver-blue Nissan sedan with a crushed front end before repair at DG Collision Center in Covina, CA

Before

Silver-blue Nissan sedan fully repaired and refinished after collision repair at DG Collision Center in Covina, CA

After

White Chevrolet Colorado pickup with front-end collision damage before repair at DG Collision Center in Covina, CA

Before

White Chevrolet Colorado pickup fully repaired and refinished after collision repair at DG Collision Center in Covina, CA

After

Photo gallery

Structural work inside our Covina shop

Where we serve

Frame straightening across the valley

Our shop is at 781 E. San Bernardino Road in Covina. We straighten frames for drivers from Glendora, San Dimas and the wider San Gabriel Valley, with free local pickup and delivery.

Covina

Glendora

San Dimas

San Gabriel Valley

DG Collision Center

781 E. San Bernardino Road
Covina, CA 91723

FAQ

Frame and structural questions, answered

What Covina drivers ask us about structural repair. Still unsure? Call 626-445-6630.

How do I know if my car has frame damage?

Warning signs are a crooked steering wheel, uneven tyre wear, doors that no longer close cleanly and panel gaps that changed after a hit. The only way to be sure is to measure the control points against the factory sheet.

What is a unibody and can it be straightened?

Most modern cars are unibody: the body and the frame are welded into one structure that absorbs the impact. That structure can be measured and pulled back, and badly crushed sections are replaced and welded.

Can a bent frame be pulled straight again?

In most cases, yes. We anchor the vehicle and pull the structure back in measured stages. Sections that are torn or crushed past the manufacturer’s limits are replaced at the approved joints instead.

Does straightening a frame weaken the car?

No, when it is done to OEM procedure. We stay inside the manufacturer’s pull limits, replace sections only at approved joints and restore the corrosion protection before the car is refinished.

How long does structural repair take?

Plan on a week or more. Measuring, pulling and re-measuring add time, and parts lead times on rails and aprons can extend it. We give you a realistic date once the car is measured.

Will my insurance cover frame repair?

Structural repair is normally part of a collision claim. We document the measurements, send the report with the estimate and work directly with your insurer so the repair can be approved without extra paperwork.

Do you have to remove the body from the frame?

Not always. On body-on-frame trucks we can measure and pull with the body in place, depending on the damage. We will tell you at inspection whether the body has to come off.

Can a wheel alignment fix a bent frame?

No. Alignment corrects suspension settings, but it cannot move a bent rail. If the wheels will not come back into specification after aligning, the structure needs measuring first.

Do you repair classic and body-on-frame cars?

Yes. We measure and pull full-frame classics and trucks as well as modern unibody cars, and we keep the printouts so the repair can be explained years later.

Does frame repair show on a vehicle history report?

It may be recorded if the repair went through insurance. A structural repair with documentation is far easier to explain than damage that was never measured, and the report stays with the car.

Related services

More from our Covina body shop

Pontiac Firebird after collision repair and refinish at DG Collision Center

Auto Body Repair

Panel replacement, rust repair and insurance-approved collision work for every make and model.

DG Collision Center truck used for free local pickup and delivery around Covina

Insurance Claims Help

We guide you through the claim, work with every insurer and document the repair so you pay less hassle.

Black Toyota Tundra after collision repair at DG Collision Center in Covina

Auto Painting

PPG certified paint technicians and our large paint booth deliver an exact colour match and a durable finish.

DG

Let's get your car back on the road.

Send photos of the impact and we will book a measuring appointment, or call and talk it through with a technician.